Ultrabracket wallmount | Sonos ONE & Play 1 [Digital STL file]

Ultrabracket wallmount | Sonos ONE & Play 1 [Digital STL file]

This is a DIGITAL product which you can use to 3D print yourself. Suitable for the Sonos ONE and Play 1.

Universal system

We have developed our Ultrabracket speaker wallmount system as a universal speaker mounting system. The system is universal for various commonly used wifi speakers. In addition, the Ultrabracket has been developed in such a way that the speaker can be mounted at different angles.

Easy to mount

The Ultrabracket consists of two parts. The first part (wallmount) is connected to the wall with screws. The second part (speakermount) is to fix around the speaker. When mounted, the speaker can be perpendicular or at an angle of 45° to the wall. This way you can mount the speaker perpendicular to a wall, or sideways in corners.

3D prints are strong enough

By 3D printing products, we are able to keep production within our company in the Netherlands. We design and manufacture our products in such a way that they are very sturdy and feel solid. It is even possible to produce a product in your own color on request.

Product content

The Ultrabracket Sonos ONE & Play 1 set contains:

• Wallmount universal in selected color [downloadable STL file]
• Speaker bracket in selected color for Sonos ONE & Play 1 [downloadable STL file]

How to use

Mounting the Ultrabracket Sonos ONE & Play 1 is done as follows:

1. Hold the wall mount at the desired height on the wall, use a spirit level,
2. Mark drill holes on the wall,
3. If drilling in a stone wall, drill holes of 6mm wide, deep enough for the plugs,
4. Put the plugs in the wall and screw on the wallmount,
5. Place the power cable through the recess in the speaker mount and into the speaker,
6. Place the speaker in the speaker mount and slide the speaker mount into the wall mount at the desired angle.